Product display
Material and Finish
Gaskets can be produced in different materials and with different surface treatments; all in accordance with RoHs/ELVV regulations.,
material
Carbon steel hardness 465-550HV10 hardened and annealed
·Stainless steel AISI 316L EN10088-14404, surface hardness ≥550HV0.05 after surface hardening
·Other materials can be customized according to customer requirements (hydrochloride-resistant nickel-based alloy C-276, etc...)
surface treatment
KL100+VH301 Cr6-free red corrosion resistance is at least 600 hours (salt spray corrosion test according to ISO9227)
Mechanical galvanized + seat seal without Cr6 red corrosion resistance at least 600 hours (salt
Fog corrosion test according to I5O9227)
·Other surface treatment according to the minimum order quantity
working principle
How the product works
The inclination angle a of the cam tooth of the pad circle must be greater than the angle B of the bolt thread. When the bolt is tightened, when the surface of the knurled tooth contacts the bottom of the thread head and the surface of the supporting substrate, the cam tooth a with a larger angle compared to the thread angle is Looseness is not allowed, thanks to the tension created when the cam teeth are lifted.
safety fastening system
To ensure a complete fastener thread system, the company's secure fastening system utilizes tension rather than friction based on traditional fastening methods, this method ensures the secure fastening of the threaded system.
The secure fastening system is a pair of two identical flat washers with cam teeth on one side and radial knurled teeth on the other.
performance
The inclination angle a of the unique cushion circle cam teeth must be greater than the angle B of the bolt thread.
The coefficient of friction of the outer knurled tooth surface of the washer is much higher than that of the cam tooth surface.
Washers are much harder than bolt/nuts of all grades (8.810.9 and 12.9).
advantage
This fastening solution ensures optimum locking performance against shocks and dynamic loads.
The system can be used independently under lubricating oil conditions. This system can ensure safe fastening under non-lubricated conditions and can also work under lubricated conditions. However, it is still recommended to use high-quality lubricants, which can make safe fastening System performance is maximized
. This fastening system can be reused without loss of performance. In the case of repeated use, to properly position the gasket, it is necessary to check that the cam teeth face the cam teeth.
Fastening elements can be locked with high or low preload forces.
· Can be reused for any kind of bolts/nuts of any grade (up to grade 12.9).
· Does not need to be re-tightened.
·The surface treatment does not contain Cr6, so there will not be any danger of hydrogen embrittlement.
·The gasket pieces are glued into pairs, and the cam teeth face the cam teeth surface, in order to facilitate the installation of the convenient system.
Installation Instructions
These two-piece gaskets are glued in pairs to avoid misalignment during assembly.
In the case of repeated use, to properly position the gasket, it is necessary to check that the cam teeth face the cam teeth.
· Not recommended for use on movable substrate surfaces (for example: a flat washer exists between this washer and the substrate surface).
·It is not recommended to use on the surface of too soft substrate (for example: rubber, wood, plastic).
· Not recommended for use in the presence of high sedimentation.
·It is not recommended to use the gasket whose surface hardness is higher than this gasket.
·Do not use in the case of self-locking nuts and self-locking threads.
·It is not recommended to be used in "left rotation" thread (screw/nut can be rotated relative to each other).
company profile
Hengqiao Iron and Steel Trading Co., Ltd. focuses on the development and manufacture of anti-loosening gaskets. After years of technical pursuit and a large number of verification data, the anti-loosening locking force of this part under various working conditions has been improved.
To ensure a complete fastener thread system, the company's secure fastening system utilizes tension rather than friction based on traditional fastening methods. This method ensures the secure fastening of the threaded system. The secure fastening system It is a pair of washers composed of two identical flat washers with cam teeth on one side and radial knurled teeth on the other side.
Adequate equipment category
Constant Joe trade co., LTD., focusing on automotive materials, high-end home appliance, equipped with large warehouse, product specification is complete, the variety is rich, perennial inventory is enough, many countries around the best-selling, one-stop shopping mode, greatly reduce the purchase cost, more worry.
quality of the product
Shanghai constant Joe trade co., LTD., as baosteel designated dealers, masteel, shougang, VAMA user specified agreement, pay more attention to product quality, the company strictly use good material, do manual work is careful, mature technology, product quality cengcengbaguan more technical staff, its products have strong corrosion resistance, high plasticity, durable not easy deformation, etc., is a very good choice.
Service system perfect
Shanghai heng Joe trade co., LTD., with good production equipment, mature technology, let you no worries worry before purchase. Constant Joe trade co., LTD., equipped with professional logistics team to play, perfect international transport routes, thoughtful service delivery to the factory, your goods can smooth arrival. In addition, if you buy after any aspects of the question, can contact our customer service solutions. Such a complete service system, just to bring you a better purchasing experience.
Audited Supplier 
){kind=link}