Electrical steel usually referring to cold rolled electrical steel. can be divided into two major categories including grain oriented electrical steel and non-oriented electrical steel.Grain oriented electrical steel, with its easy magnetization direction parallelto the rolling direction, has excellent magnetic properties in this direction including ow core loss, high permeability and low magnetostriction and is widely used in the transformer industry. Further it can obtain lower core loss by domain refinement treatment. Meanwhile non-oriented electrical steel, featured by random distribution of grain orientation and magnetic isotropy,is widely applicable to the motor industry.
Product features
Magnetic Properties
The magnetic properties of the product is featured by its low core loss, high permeability and excellent application performance.
Thickness Tolerance
The good thickness tolerance is characterized by small difference in thickness in a directionparalleto thedirection of rolling. small difference in thickness in a directionperpendicular to the direction of rolling, and high lamination factor.
Processing Properties
The product is suitable for punching and cutting with excellent dimensional tolerance.
Insulation Coating
The insulation coating has small color deviation, good adhesiveness and excellent resistance to heating and corrosion with high insulation coating resistance.There are several types of insulation coating available for production .According to the test results performed by the professional inspection organizations,the contents of hazardous substances comply with all the prevailing international and domestic environment protection laws and regulations including EU RoHS and REACH regulations.
Solucky steel Limited is a third-party supply chain service enterprise focusing on materials for automobiles, high-end household appliances, as well as material processing and storage. Its headquarters and warehouse base are set up in Shanghai BaoShan, and has branches all over the country, 20+ subsidiary companies,including Foshan, Guangdong, Chongqing, Wuxi, etcz.
Mechanical properties:
The material |
Mechanical properties |
YS |
TS |
EL |
Hardness |
Lamination factor |
L |
C |
L |
C |
L |
C |
50WW1300 |
230 |
240 |
350 |
360 |
50 |
50 |
100 |
98.5 |
The electromagnetic performance:
Grade |
Nominal thickness |
Theoretical density |
Max.Core loss |
Min.Induction |
Min.Number of bends |
Min.Lamination factor |
P1.s150 |
50HZ |
B5000 |
mm |
kg/dm³ |
W/kg |
T |
|
% |
50WW1300 |
0.50 |
7.85 |
7.5 |
1.74 |
15 |
97.5 |
Product Designation:
The steel grade comprises the following in the order given:
1)one hundred times the nominal thickness of the material, in millimeters;
2) W: capital letter of Chinese pinyin "Wu'
3)Characteristic letter:
W: capital letter of Chinese Pinvin "Wu";
TG: capital letter of Chinese Pinvin"Te Gao":
GP: capital letter of Chinese Pinyin "Gao Ping"
H: high permeability non-oriented electrical steel
K: non-oriented electrical steel for magnetic switch
4)onehundred times the maximum value of specific total loss in watts
per kilogram at 1.5 T and 50 Hz. unless otherwise specified
Examples:
Non-oriented electrical steel with the maximum specific total loss of 4.0 W/kg at 1.5 T and 50 Hz and a nominal thickness of 0.50 mm shall be designated as 50WW400 Special high freguency non-oriented electrical steel with the maximum specific total loss of 15.0 W/kg at 1.0 T and 400 Hz and a nominal thickness of 0.20 mm shall be designated as 20WTG1500 Magnetic switch series non-oriented electrical steel with the maximum specific total loss of 3.4 W/kg at 1.0 T and 50 Hz and a nominal thickness of 0.70 mm shall be designated as 70WK340.
Differentinsulation coatings are available to meet a range ofcustomerrequirements according to interlaminar resistance
corrosion resistance. punchability, weldability and soon.
Coating code |
T4 |
H4 |
K |
L |
Z |
V |
|
|
|
|
|
|
|
Component |
Semi-organic |
Semi-organic |
Semi-organic |
Semi-organic |
Semi-organic |
Semi-organic |
Lamination factor |
High |
High |
High |
High |
High |
High |
Interlaminar resistance |
High |
High |
Very high |
Very high |
Very high |
High |
Attachment |
Very good |
Very good |
Good |
Good |
Very good |
Good |
Corrosion resistance |
Good |
Good |
Good |
Good |
Good |
Good |
Heat-resistance |
Withstands stress-relief annealing <780ºC under inert gas |
Withstands stress-relief annealing <750ºC under inert gas |
Withstands stress-relief annealing <600ºC under inert gas |
Unsuitable for annealing |
Unsuitable for annealing |
Withstands stress-relief annealing <600ºC under inert gas |
Punchability |
Very good |
Very good |
Good |
Good |
Very good |
Very good |
Weldability |
Good |
Good |
Good |
- |
- |
Good |
Product specifications available:
Available thickness |
Available width range |
Inside diameter |
mm |
mm |
mm |
0.15,0.20 |
950-1000 |
508 ± 10 |
0.30,0.35,0.50,0.70,0.75,0.80 ,0.85 |
1000-1250 |
508 ± 10 |
Product use:
Varieties |
High grade |
Middle grade |
Low grade |
|
|
|
|
Medium and small power transformer |
★ |
|
|
Voltage regulator,Reactor and magnetic amplifier |
★ |
|
|
Inductor |
★ |
|
|
TV&Radio transformen |
|
★ |
★ |
Welding transformer |
★ |
★ |
|
Large&medium-scale motor |
★ |
★ |
|
Smallµ-scale motor |
★ |
★ |
★ |
Sealed motor |
★ |
★ |
|
Intermit motor |
|
★ |
|
Medium-frequency motor and driven motor |
★ |
|
|
Compressor motor |
★ |
★ |
★ |
Rectifier |
★ |
★ |
★ |
Choke coil |
|
★ |
|
Relay and electromagnetic switch |
★ |
★ |
|
Main Products
Product Application
![50ww1300 Iron Steel Cold Rolled Non Oriented Electrical Steel for Transformers](//www.micstatic.com/athena/img/transparent.png)
Machines & Processing
![50ww1300 Iron Steel Cold Rolled Non Oriented Electrical Steel for Transformers](//www.micstatic.com/athena/img/transparent.png)
Packing & Delivery & logistics
![50ww1300 Iron Steel Cold Rolled Non Oriented Electrical Steel for Transformers](//www.micstatic.com/athena/img/transparent.png)
![50ww1300 Iron Steel Cold Rolled Non Oriented Electrical Steel for Transformers](//www.micstatic.com/athena/img/transparent.png)
Why Choose Us
1. Most of steel raw material we have stock,and we have our own processing mill, saving processing costs;
2. Our steel material have After-sales guarantee. Our long-term customers have: Tesla,Magna,China's foreign trade companies;
3. We have rich export experience, One-stop service;
4. Our mill close to BAOSTEEL mill.
5. We have passed the ISO9001:2015 quality authentication, and own the import & export rights.
6. We now have head office office and factory in Shanghai.Have office in Shenzhen&Wuxi international trade& business center.
7. We have participated in the Germany's Blechexpo exhibition,Also we spent 20 days investigating the European steel market, To better understand customers's requirement;
8. We accept small order and trial mold.
![50ww1300 Iron Steel Cold Rolled Non Oriented Electrical Steel for Transformers](//www.micstatic.com/athena/img/transparent.png)
FAQ
1.Where is your factory?
Our head office and warehouse located in Shanghai--the biggest steel making center of China
2.How long is your delivery time?
Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
3.What about the MOQ?
MOQ only 200KG,include coils and sheets
4. How long is your lead time?
In general, our delivery time is within 7-15 days, and may be longer if the quantity is extremely large or special circumstances occur.
5.How's your product quality?
We only sell mid to high end steel materials,100% quality guarantee and cost-effective.
6.What are your terms of payment?
You can make the payment to our bank account,T/T, 30% deposit in advance, 70% balance against the copy of B/L.
7.How many countries you already exported to?
We have exported to America, Canada, Brazil, Chile, Colombia, Russia, Ukraine, Thailand, Myanmar, Vietnam, India, Kenya, Ghana,somalia and other African countries.Our export experience is rich, we familiar with different market demands, can help customers avoid a lot of trouble.
8.What are the certifications for your products?
We have ISO 9001, MTC, third parties' inspections are all available such SGS, BV ect.